HomeGuides
Equipment Financing Cost Calculator and Guide for Canada

Equipment Financing Cost Calculator and Guide for Canada

Compare the full cost of Canadian equipment loans and leases. Use the free calculator, then check signing cash, instalments, fees and buyout.

Written by
Published on
December 17, 2025

Quick answer: To calculate equipment financing cost in Canada, add the cash due at signing, scheduled payments and any final amount needed for the ownership outcome you want. Count each payment once. The free loan versus lease calculator can estimate payments and totals. Add fees and applicable taxes from the written quotes, then check the dates against your cash budget.

Disclaimer: This article is general information only and is not tax, legal or accounting advice. Tax rules change and depend on your situation. Speak with a qualified accountant or tax advisor before making any purchase or filing decision. Mehmi Financial Group does not provide tax advice.

Key takeaways

  • Compare quotes for the same delivered equipment, including installation or accessories your business needs.
  • Use the total cash due at signing and the number of payments remaining afterward. If the first payment is collected up front, count it once.
  • Compare the cost to own for both offers if you expect to keep the machine. For a lease return, include transport and any return charges.
  • Record when GST/HST is due and when an eligible input tax credit might be received. Use your accountant's figures when comparing after-tax cash flow.

Start with the same equipment and the same end date

Give both providers the same invoice or purchase quote. A CNC machine quote may include delivery but leave rigging and electrical work to you. One commercial kitchen equipment offer may include installation and another may cover only the machines. If one provider includes an item in financing and the other requires you to pay it separately, put the cost on both sides in the right period. That will show whether the payment difference comes from the financing or from what is being purchased.

Pick the date when you expect to replace, return or own the equipment. If both quotes run to that date, compare the payments through that point. If one agreement ends earlier, include the cost of continuing to use the asset or replacing it for the remaining months. When ownership differs, record who keeps the asset and any money expected from resale. For a lease return, budget for continued use or replacement if the business needs the machine beyond that date.

Separate the total cash leaving the business from the financing charge. Loan principal repays the money used to buy the asset. Interest and lender fees are part of the cost of borrowing. On a lease, use the actual payment stream and end-of-term option. The payment may include service, insurance or other items. Request a breakdown if you want to compare those items with the costs of owning and servicing a machine yourself.

Fill in the calculator and complete the cash comparison

The comparison tool offers Loan vs. Lease, Loan vs. Loan and Lease vs. Lease views. In the first view, enter the equipment price, down payment, annual rate and months on both sides. On the lease side, choose the advance-payment setup and enter the residual or purchase amount shown in the quote. Use the dollar amount option when a fixed buyout is stated, including a nominal amount. The calculator's $10 preset omits the $10 from the displayed comparison total. Check the final dollars against the written quote.

The displayed comparison is a scheduled estimate. It does not calculate all taxes, separate fees, a mid-term payoff or a return charge. The tool includes a custom lease residual in its total, so use the contract to decide whether the figure is an amount you would actually pay. If the buyout is fair market value rather than a fixed dollar amount, model a range and ask how the contract sets the final price.

When you already have actual payment amounts, use them to finish the comparison. Request the exact signing amount and a dated list of payments. A lease may collect first and last payments at signing. Those advance payments belong in the cash due at signing, then use only the other instalments when you total later cash. Ask whether a separate deposit is refundable, when it would be returned and what could reduce the refund.

Items to put in the cash comparison
WhenWhat to includeWhat to check
At signingDown payment, advance instalments, upfront fees and any separate depositAsk which amounts reduce the balance, count as scheduled payments or may be returned.
While using the machineRemaining instalments, service and insurance costs that differ, and any fees due laterUse the written dates. Identify charges already included in a payment.
At the end or on early exitBuyout, final loan payment, return transport, renewal, or applicable payout chargesMatch the ownership result and time horizon. Use a dated payout if leaving early.

Worked example for keeping the equipment

Assume two written offers cover the same $120,000 machine and installation. Both cover 60 months. You plan to own the equipment at the end, and the lease has a fixed buyout. These invented quotes use pre-tax figures and exclude operating costs and trade-in proceeds.

Illustrative loan and lease cash outflows before tax, in Canadian dollars
Cash itemLoanLease with buyout
Down payment$12,000$12,000
Upfront fees$600$900
Advance instalments at signing$02 at $1,980, totalling $3,960
Total due at signing$12,600$16,860
Instalments after signing60 at $2,200, totalling $132,00058 at $1,980, totalling $114,840
Final amount to own$0$19,000
Total cash to own$144,600$150,700

The lease payment is $220 lower. Keeping the machine costs $6,100 more over the full schedule, and the lease requires $4,260 more cash at signing. The due-at-signing line already contains the down payment, fees and advance instalments. Add that subtotal to the remaining instalments and the buyout. If the agreement lets you return the machine, the illustrated lease outflow before return costs is $131,700. You would give up the equipment at the end, so compare that figure with the cost of ownership after accounting for the value of the machine you would retain.

Find the buyout that would make the totals equal

In the example, the lease totals $131,700 before the buyout. Subtract that from the loan total of $144,600 to find a break-even buyout of $12,900, assuming the lease has no additional purchase fee. The written buyout is $19,000, so the lease would need a $6,100 reduction in buyout or other charges to match the loan's cash total. If the lease has a separate purchase fee, deduct it from the $12,900 before comparing buyout prices.

If you need the lease to free up cash for installation, check the signing figure too. A lower recurring payment helps only after those early bills are paid. Put the dealer's invoice, the financing provider's signing invoice and any installation charges in the same dated cash forecast. That reveals whether the business needs an extra contribution before the equipment starts earning revenue.

Adjust for sales tax timing and changes to the plan

Get the amounts due on the supplier invoice, during the term and on any lease buyout. Ask what the provider will finance and what you must pay directly. Record gross cash due on each date first. Then ask your accountant which GST/HST input tax credits, if any, you can claim and when they would affect cash flow. CRA ties eligibility to factors such as registration, commercial use and documentation. It also has rules for periodic lease payments. Build a separate line for any expected recovery so the forecast can show a gap between the initial payment and receipt.

Test an early replacement using a payout or termination quote for the month you may sell the equipment. The agreement may require additional amounts to settle, even if the remaining scheduled payments look straightforward. If the asset will be returned, ask who pays freight, inspection and repair charges. Confirm any usage limits and the required notice date. Keep the expected resale or trade-in amount separate from the amount you owe so you can see what happens if the equipment sells for less.

Frequently asked questions

Can I add a fee to the equipment price in the calculator?

Use that approach only if the charge is financed and the tool's fields still represent the actual agreement. If the residual is set as a percentage of the equipment price, changing the price can change the residual estimate too. Use the stated buyout amount when available and enter any fee you pay at signing on its own line.

Does the lowest monthly payment mean the lowest overall cost?

Check how many payments the agreement requires, what you pay before the first scheduled instalment, and what you owe at the end. A longer schedule or a larger buyout can reduce the recurring amount while changing the total. Run the same ownership and timing comparison for every quote.

How do I estimate what I still owe on a loan after two years?

Use the equipment loan amortization guide to estimate the balance after a scheduled payment. Request the lender's dated payout if you plan to settle. This cost comparison starts with the amounts you pay. The schedule shows how principal and interest change within those payments.

Tools and next steps

Save the quotes, input assumptions and chosen ownership outcome. Review equipment financing fees and lease end-of-term charges before you finalize your comparison.

To review a Canadian equipment financing quote, contact Mehmi Financial Group at 1-833-863-4644 with the supplier invoice, payment schedule, fees and buyout terms.

Disclaimer: This article is general information only and is not tax, legal or accounting advice. Tax rules change and depend on your situation. Speak with a qualified accountant or tax advisor before making any purchase or filing decision. Mehmi Financial Group does not provide tax advice.

Sources

By Jodhbir Mehmi. See our editorial standards. Updated November 12, 2026.

Frequently asked questions

Apply Now

YOUR NEXT STEP WITH MEHMI

Ready to move forward?

Choose the path that fits your role. Whether you're seeking capital, selling equipment, or placing a client file, start in the right place.

FOR BUSINESS OWNERS

Find financing for your next move.

Buying equipment, refinancing, or managing cash flow? Share your amount, purpose, and timeline so we can review potential options.

Get Financing Options →

For businesses looking for capital

FOR EQUIPMENT VENDORS

Give more buyers a way forward.

Offer financing as part of your sales process and help customers move ahead without building your own lending operation.

Explore Vendor Financing →

For dealers, distributors & manufacturers

FOR BROKERS & ISOs

Have a commercial file to place?

Explore Mehmi's broker program for equipment and business financing submissions and working with our team.

Explore Broker Program →

For commercial finance professionals

This guide is general information, not financial, legal or tax advice. Read our editorial standards.

Explore your industry

Find guidance for your sector and how your business operates.

9 industries · Swipe or use the arrows to see them all.

Transportation & logistics

Explore financing considerations for carriers, logistics businesses and freight operations.

Explore industry →

Construction & contractors

Plan around project costs, contract timing and day-to-day business needs.

Explore industry →

Manufacturing & wholesale

Explore financing for production, order cycles and wholesale operations.

Explore industry →

Farming & agriculture

Consider seasonal cash flow, operating needs and long-term farm investment.

Explore industry →

Restaurants & hospitality

Explore financing for food-service businesses, hospitality operations and growth.

Explore industry →

Medical, dental & wellness

Plan financing around practice operations, patient services and business expansion.

Explore industry →

Technology & business services

Explore financing considerations for project delivery, hiring and growth.

Explore industry →

Forestry, mining & energy

Consider contract cycles, operating requirements and investment in resource businesses.

Explore industry →

Aviation & marine

Explore financing considerations for commercial aviation and marine operations.

Explore industry →