Quick answer: Aviation ground support and hangar equipment may be considered for loans, leases or rental arrangements, depending on the asset and business. Build the request around the service contract, airport readiness and equipment's useful role. Separate movable assets from building work, and test what happens if the airline contract starts late or ends before the equipment obligation.
By Jodhbir Mehmi · Prepared under our editorial standards.
Key takeaways
- Match the equipment commitment to the contract's reliable revenue period.
- Airport access and operational acceptance are separate from financing approval.
- Split movable equipment, installation and structural work into clear budgets.
- Confirm maintenance, backup equipment and permitted relocation before signing.
- Model startup cash before the first airline or handling invoice is collected.
Finance a defined service capability
A ground handler buying a tug, belt loader or ground power unit is trying to deliver a service at a particular airport for particular aircraft and customers. Start with those requirements. A low-priced unit that cannot meet the contract's operating specification is not a bargain, and financing it does not resolve the mismatch.
Ask the operating team to document the required capacity, compatibility, duty cycle and service support. Include the airport location, intended work area and expected daily use. For hangar equipment, identify the aircraft or maintenance tasks it supports and any installation or facility dependency. Keep technical acceptance with qualified personnel.
This guide focuses on the financing decision for ground support and hangar assets, not aircraft acquisition or permission to perform aviation maintenance. It also does not establish regulatory approval. The business must verify the requirements of the airport, customer, manufacturer and applicable authorities independently.
Separate the purchase into workable scopes
| Scope | Examples to identify | Financing question |
|---|---|---|
| Movable ground support equipment | Tugs, GPUs, baggage tractors and belt loaders | Which exact units and condition will the provider accept? |
| Movable hangar equipment | Jacks, stands, tools and test equipment | Are calibration, support and useful life documented? |
| Installation and site readiness | Charging, electrical work and equipment commissioning | Which costs are funded and which require owner cash? |
| Building or leasehold work | Doors, structural changes and fixed services | What landlord approvals and separate funding are required? |
Do not describe an entire hangar project as equipment simply because machinery is part of it. Ask for itemized quotes and identify ownership of installed items under the property agreement. If a component cannot readily be moved, the financing provider may need additional information about the site and the right to install or remove it.
List the costs required to make an electric unit usable, including the charging arrangement and any necessary facility work. Have the technical team assess the actual duty cycle and charging window. An equipment payment should not begin on the assumption that a power connection will be available without a confirmed installation plan.
Read the service contract beside the payment schedule
Record the contract start date, committed period, renewal options, termination rights and how volumes are determined. Distinguish guaranteed payments from forecast activity. A schedule showing many expected aircraft movements does not necessarily mean the customer has committed to pay for all of them.
Compare the reliable revenue period with the financing term. If the equipment obligation runs longer, identify the plan for later use, relocation, sale or continued payments. Renewal may be commercially plausible, but it remains different from a signed commitment. The lender and owner should see that distinction in the forecast.
Check whether the contract requires backup capacity or replacement equipment during downtime. Price the support arrangement rather than assuming the manufacturer warranty keeps operations uninterrupted. Warranty coverage, service response and availability of a substitute unit are different matters.
Confirm airport readiness before delivery
At Toronto Pearson, the airport's permit office guidance describes formal business agreements and vehicle-marker processes. Its AVOP guidance separately addresses authorization and training for employees driving airside. These are Pearson examples, not a universal checklist for every Canadian airport.
Confirm the actual airport's current requirements with its responsible team. Ask what must be completed for the company, operators and equipment before service begins. Put those tasks on the mobilization schedule and assign an owner to each. Financing approval should not be used as evidence that airside access or equipment acceptance is complete.
Review insurance requirements with the broker and customer. Identify the equipment's use, location, transit and any lender or lessor interests that must be documented. Avoid assuming that an existing policy automatically covers a new unit or a different airport assignment.
Worked example: the contract starts later than the equipment payments
Consider a hypothetical Canadian ground handler acquiring $240,000 of equipment. Assume a proposed financing arrangement requires $24,000 initially and a $4,500 monthly payment. The company also needs $18,000 for mobilization and $12,000 for initial training and setup. These are invented planning inputs, not quoted financing terms or actual airport charges.
The business has $90,000 in available cash. Initial outflows total $54,000, leaving $36,000. If management wants a $30,000 minimum operating reserve, the opening cushion is $6,000. That cushion needs to support any delay between the equipment arriving and the contract producing collected cash.
Suppose the planned monthly contract collections are $45,000, with $27,000 in direct cash costs and $8,000 in allocated fixed cash obligations. After the $4,500 equipment payment, the monthly contribution to remaining cash is $5,500. Now assume the start is delayed one month and the company incurs $6,000 of unavoidable readiness costs plus the $4,500 payment. Cash falls from $36,000 to $25,500, which is $4,500 below the chosen reserve.
The next issue is term mismatch. If the customer contract ends after 36 months but the equipment agreement requires 60 monthly payments, 24 scheduled payments remain. At $4,500 each, those payments total $108,000. That is a scheduled-payment exposure, not a payoff quote: early termination or settlement may be calculated differently under the contract.
A second airport assignment could support those later payments, but only if the equipment can be moved and used there and the new work is available. Include transport, recommissioning and any required consent in that assessment. Do not count an assumed resale value or future contract as guaranteed repayment.
The example shows two separate decisions: whether the opening cash can absorb delay and whether the business can support the obligation beyond the initial contract. A positive monthly contribution after startup does not answer either question on its own.
Compare loan, lease and rental on the actual duties
A loan or lease may fit equipment expected to remain useful across several contracts. Rental may suit a shorter assignment or temporary gap, subject to availability and conditions. Ask each provider for a proposal based on the same equipment capability, delivery date and expected use.
Compare initial cash, payment frequency, total scheduled payments, fees, final obligations and ownership or return conditions. For rentals and leases, review usage limits, maintenance duties, damage provisions and return transport. For any structure, ask what happens if the airport contract ends or the equipment must move to another location.
Ask the accountant how the actual agreement will appear in the business’s financial reporting. The commercial comparison should remain understandable before any accounting treatment is considered: what must the business pay, what can it use, and what happens at the end?
Assess used equipment beyond the purchase price
For a used GPU, tug or other unit, obtain service records, condition evidence and a clear description of refurbishment. Ask who performed the work and what the warranty covers. A seller's label such as refurbished should be translated into an actual list of inspections, replaced components and remaining limitations.
Confirm parts and maintenance support near the airport. Include the cost of bringing the equipment into the required configuration and completing acceptance. If the unit is imported or moved a long distance, obtain professional advice and quotes for the applicable transport and import arrangements instead of assuming the advertised price is the delivered cost.
Review the consequence of one unit being unavailable. A cheaper unit with weak support can expose the service contract to disruption. The financing decision should include a realistic backup plan, while the technical team determines whether the equipment meets the required standard.
Prepare the financing package
Provide the complete equipment list, vendor quotes, condition details, business financial records, existing obligations and proposed cash contribution. Include the service contract or relevant supporting information, with confidential material shared through the appropriate review process. Explain which receipts are committed and which are forecast.
Add a mobilization schedule showing delivery, installation, airport permissions, staff readiness, acceptance, service start and first collection. Mark dependencies clearly. If equipment must arrive before all conditions are settled, state the cash and storage consequences rather than hiding them in the expected start date.
For a new business, confirm the provider's eligibility before treating a contract award as sufficient. Mehmi's startup review requires at least six months of revenue-generating business bank statements. A new airport contract may support the explanation of future work, but it does not replace that history.
Frequently asked questions
Can hangar doors and building work be included?
They require separate review. Itemize the work, confirm landlord or owner permissions and identify the funding source for each cost. Do not assume approval for movable equipment covers structural improvements or every installation expense.
Can financed equipment be moved to another airport?
Check the agreement, insurance and destination requirements. Lender or lessor consent may be needed, and the new location may require different operational approvals. Include relocation costs before relying on another assignment.
Does a long airline contract guarantee approval?
No. The provider still reviews the borrower, equipment, payment capacity and contract terms. Termination rights, volume assumptions and collection timing can materially change the financing assessment.
Tools and next steps
Create a contract-to-equipment schedule showing the committed revenue period, payment term, lowest opening cash balance and remaining scheduled payments at contract expiry. Add a one-month startup delay and a realistic relocation scenario. Use the results to decide the appropriate equipment commitment.
Discuss the asset list and service schedule with Mehmi's equipment financing team at 1-833-863-4644. Eligibility, structure and funding conditions remain subject to lender review.
