HomeGuides
$1 Buyout vs FMV Lease in Canada: Which to Choose

$1 Buyout vs FMV Lease in Canada: Which to Choose

A checklist for choosing between $1 buyout and FMV leases in Canada, covering payments, end-of-term risk, tax, early payout and underwriting.

Written by
Published on
December 25, 2025

Quick answer: A $1 buyout lease sets a nominal purchase price at the end of the term, so you own the equipment once the payments are done. An FMV lease lets you return, renew or buy at fair market value under the contract, which usually means a lower payment but an unknown end cost. Pick the $1 buyout if you expect to keep the equipment for years and run it hard. Pick FMV if lower payments and the option to upgrade or return matter more. Approval, rates and amounts are subject to lender review.

Disclaimer: This article is general information only and is not tax, legal or accounting advice. Tax rules change and depend on your situation. Speak with a qualified accountant or tax advisor before making any purchase or filing decision. Mehmi Financial Group does not provide tax advice.

The usual advice says FMV is cheaper. That is true for the monthly payment and often wrong for total cost. This guide walks through the trade-offs that drive what you really pay in Canada: residual risk, your leverage at the end of the term, tax timing, early payout terms and what underwriters look for. It ends with a checklist you can run in a few minutes.

What a $1 buyout lease implies

A $1 buyout lease, also called lease-to-own or a nominal buyout, sets the end-of-term purchase price at a token amount, often $1 and sometimes $10. In practice:

  • Your monthly payment is usually higher than on an FMV lease, because little value is left at the end.
  • You are paying the equipment down through the term.
  • You have already decided to keep it, so you are choosing certainty over flexibility.

For a vehicle example, see our guide to lease-to-own truck programs in Canada. The same logic applies well beyond trucking.

What an FMV lease implies

An FMV lease is cheaper each month because the lessor expects to recover value at the end. At term end you can usually return the equipment, buy it at fair market value or renew the lease. Those options are why FMV is popular for equipment that may go out of date.

In practice, FMV at lease end is a negotiation. The lessor holds title and you depend on the equipment to operate. Depending on the asset and how much you need it, that can work well or leave you with little leverage.

Compare by exit path

Your likely outcomeStructure that usually fitsWhyKeep the equipment for years$1 buyoutNo buyout negotiation and no surprise at the end.Upgrade or replace in a few yearsFMVLower payments and a clean return option.Unsure, probably keepFixed buyout or $1A known end cost without the full FMV uncertainty.Contract-based or project workFMVYou can hand it back if the contract ends.

If you plan to keep the asset, FMV is a gamble you do not need to take. If you might not keep it, a $1 buyout can tie you to the wrong equipment for longer than it should. To model the real difference including fees, taxes, residual and buyout, use our equipment financing cost calculator guide.

How structure affects underwriting

Lenders approve risk, and the structure changes how that risk looks. Here is how the 5 Cs play out on this choice:

Character

With a clean payment history, either structure is easier. With a messy one, lenders want less complexity and stronger collateral, and they often prefer a predictable exit.

Capacity

FMV helps capacity because the payment is lower. But if you must keep the asset to earn revenue, FMV can create pressure at the end of the term.

Capital

Thin working capital pushes borrowers toward lower payments. A stronger cushion supports a $1 buyout comfortably.

Collateral

Durable, easy-to-sell assets, such as common construction equipment, popular skid steers and standard shop equipment, can support either structure. Specialty assets with volatile resale values make FMV harder to price.

Conditions

When interest rates are uncertain, structure matters more. You want a payment that stays manageable if revenue softens. Check the Bank of Canada for current policy rate decisions rather than relying on old figures.

Many owners pick FMV because it is cheaper per month, then pay more later because the asset became essential and they lost bargaining power at lease end. The goal is the lowest chance of getting boxed in.

Who owns the residual risk

With a $1 buyout you carry most of the depreciation risk because you are paying the asset down. With FMV the lessor carries more of it and prices the lease assuming it will recover value later. That is why FMV payments are lower: you are paying for use rather than full ownership. If you know you will keep the asset, paying for flexibility you will not use is a poor trade.

The ten-question checklist

Mark each statement true or false.

Lean toward a $1 buyout if most of these are true:

  • We plan to keep this equipment beyond the lease term.
  • The asset has a long useful life in our business.
  • We will put heavy hours on it, so returning it would be unattractive.
  • The asset is mission-critical and downtime costs us revenue.
  • We want a known buyout and a clean ownership outcome.

Lean toward FMV if most of these are true:

  • We might want to upgrade in 3 to 5 years.
  • Technology or market needs could change quickly.
  • We want lower monthly payments to protect cash flow.
  • We do not want to guess what the asset will be worth later.
  • Returning the asset at the end is a real option for us.

Still torn? Step back and compare leasing and financing more broadly with our guide to leasing vs financing in Canada.

Canadian tax: lease deductions and CCA

The tax result in Canada depends on whether you deduct lease payments as incurred or treat the deal more like a financed purchase. CRA's guidance says you can generally deduct lease payments incurred in the year for property used in your business. CRA also notes cases where lease payments can be treated as combined principal and interest if both parties agree and CRA's rules are followed.

That is one reason structure and intent should line up. A $1 buyout often matches an ownership intent. An FMV lease often matches a "use it and decide later" intent. For more detail, read our guides on operating lease tax treatment, capital lease tax treatment and CCA classes for equipment.

GST/HST timing

GST/HST is often more of a cash flow issue than a tax issue. If you are registered and using the asset in commercial activity, you may generally claim input tax credits for GST/HST paid, subject to CRA rules and timing. The structure that looks cheapest on paper can still hurt if GST/HST timing and a slow season land together.

Early payout and selling the equipment

Your real flexibility is set by the contract, not the structure's name. Owners often assume a $1 buyout lease pays off like a regular loan. Sometimes it does and sometimes it does not. Before you sign, get these in writing:

  • How the early buyout is calculated: remaining payments, a discount, fees or some mix
  • Whether you can sell the asset mid-term or must assign the lease
  • How FMV is determined at the end, including inspection rules and return condition standards

If you already own the equipment and want to pull cash out, the structure matters even more; see sale-leaseback tax implications in Canada.

Accounting: why your lender may care

Your financial statements affect covenants, bank appetite and how leveraged you look. IFRS and ASPE can treat leases differently, which can change how liabilities show up on your balance sheet. BDO Canada's ASPE vs IFRS comparison on leases summarizes the differences. You do not need to become an accountant, but avoid a structure that creates a reporting problem you did not expect.

Conditions before funding and covenants after

Lenders can set requirements before funds are advanced and rules to monitor the deal afterward. On equipment files that often means proof of insurance with the lender as loss payee, confirmation of the vendor invoice and serial number or VIN, down payment verification, delivery confirmation and, on larger files, ongoing financial reporting. Simple, believable structures tend to clear these steps more smoothly than creative ones.

How the numbers feel

Picture $100,000 of equipment over 60 months. An FMV lease assumes meaningful value is left at the end, which lowers the payment. A $1 buyout leaves almost nothing at the end, so more principal is repaid during the term and the payment rises. To sanity-check payment shapes, use our equipment loan amortization calculator.

A common scenario

A contractor picks an FMV lease on a skid steer to keep payments low through winter, expecting to upgrade. Over the term the machine becomes central to the crew's work: the attachments fit, the operators know it and the maintenance records are clean. By the end, returning it would mean retraining and downtime, and the FMV buyout comes in higher than the owner expected based on online listings. In hindsight, a $1 or fixed buyout would have matched what the business really wanted, which was ownership. A sensible rule follows: use FMV for equipment you are likely to rotate, and $1 or fixed buyouts for durable workhorses you know you will keep.

Mehmi Financial Group works with over 50 lenders and can model what you would pay, what you would own and what risk you are taking under each structure. Approval, rates and amounts are subject to lender review.

Tools and next steps

Ready to choose the right lease structure? Talk to a financing advisor or call 1-833-863-4644.

Disclaimer: This article is general information only and is not tax, legal or accounting advice. Tax rules change and depend on your situation. Speak with a qualified accountant or tax advisor before making any purchase or filing decision. Mehmi Financial Group does not provide tax advice.

Sources

Written by Jodh Mehmi, Mehmi Financial Group. Read our editorial standards.

Frequently asked questions

Is a $1 buyout lease always more expensive than an FMV lease?

It usually has the higher monthly payment, but not always the higher total cost. The FMV buyout or return costs can swing the real total.

How is FMV determined at the end of a lease?

It depends on the contract and the lessor. Some use appraisals, some use market comparables, and many apply condition and usage standards. Get the process in writing before signing.

Are lease payments tax deductible in Canada?

CRA generally allows businesses to deduct lease payments incurred in the year for property used in the business, subject to the normal rules. Confirm with your accountant.

Do I pay GST/HST on lease payments, and can I claim ITCs?

GST/HST is typically charged on lease payments, and eligible registrants may claim input tax credits under CRA rules.

What if I want to buy out early?

Ask how the early payout is calculated. A $1 buyout at the end does not mean an early buyout is cheap. Always read the payout language.

Which structure is easier to get approved with weaker credit?

It depends less on the structure and more on the overall risk: cash flow, collateral and down payment. Lower FMV payments can help capacity, while a clear ownership plan and durable collateral can support a $1 or fixed buyout.

Apply Now

YOUR NEXT STEP WITH MEHMI

Ready to move forward?

Choose the path that fits your role. Whether you're seeking capital, selling equipment, or placing a client file, start in the right place.

FOR BUSINESS OWNERS

Find financing for your next move.

Buying equipment, refinancing, or managing cash flow? Share your amount, purpose, and timeline so we can review potential options.

Get Financing Options →

For businesses looking for capital

FOR EQUIPMENT VENDORS

Give more buyers a way forward.

Offer financing as part of your sales process and help customers move ahead without building your own lending operation.

Explore Vendor Financing →

For dealers, distributors & manufacturers

FOR BROKERS & ISOs

Have a commercial file to place?

Explore Mehmi's broker program for equipment and business financing submissions and working with our team.

Explore Broker Program →

For commercial finance professionals

This guide is general information, not financial, legal or tax advice. Read our editorial standards.

Explore your industry

Find guidance for your sector and how your business operates.

9 industries · Swipe or use the arrows to see them all.

Transportation & logistics

Explore financing considerations for carriers, logistics businesses and freight operations.

Explore industry →

Construction & contractors

Plan around project costs, contract timing and day-to-day business needs.

Explore industry →

Manufacturing & wholesale

Explore financing for production, order cycles and wholesale operations.

Explore industry →

Farming & agriculture

Consider seasonal cash flow, operating needs and long-term farm investment.

Explore industry →

Restaurants & hospitality

Explore financing for food-service businesses, hospitality operations and growth.

Explore industry →

Medical, dental & wellness

Plan financing around practice operations, patient services and business expansion.

Explore industry →

Technology & business services

Explore financing considerations for project delivery, hiring and growth.

Explore industry →

Forestry, mining & energy

Consider contract cycles, operating requirements and investment in resource businesses.

Explore industry →

Aviation & marine

Explore financing considerations for commercial aviation and marine operations.

Explore industry →