HomeGuides
Excavator Loan vs Lease in Canada: Tax and Cash Flow

Excavator Loan vs Lease in Canada: Tax and Cash Flow

Excavator loan vs lease in Canada: cash flow, GST/HST timing, CCA Class 38, interest deductibility, lender checks and lease structures.

Written by
Published on
December 20, 2025

Quick answer: For a Canadian contractor, leasing an excavator is mostly about keeping cash in the business and staying flexible, while buying with a loan is about ownership and the long-run cost of the machine. Lease payments on business equipment are generally deductible in the year they are incurred. A purchased excavator is usually written off through capital cost allowance (CCA), typically in Class 38 at 30%, and loan interest may be deductible if CRA's conditions are met. Approval, rates and amounts are subject to lender review.

Disclaimer: This article is general information only and is not tax, legal or accounting advice. Tax rules change and depend on your situation. Speak with a qualified accountant or tax advisor before making any purchase or filing decision. Mehmi Financial Group does not provide tax advice.

Loan vs lease at a glance

FactorExcavator loanExcavator leaseOwnershipYou own the machine; the lender registers security on it until the loan is repaidThe lessor owns it during the term; you buy, renew, upgrade or return at the endUpfront cashDown payment plus GST/HST on the full invoiceOften a smaller amount up front; GST/HST charged on each paymentMonthly paymentUsually higher, because the full cost is paid downCan be lower with an FMV or residual structureTax treatment (general)CCA on the machine plus interest, if deductibleLease payments generally deductible as incurredFlexibilitySell or trade whenever you want, subject to the lender's securitySet by the lease terms; early exits can be costlyBest fitHigh, steady use and plans to run the machine through major component cyclesGrowing fleets, seasonal cash flow, or regular upgrades

Whichever way you lean, check the same things on every offer: total cash needed before funding, the payment in a slow month, total dollars paid if you hold to maturity, the cost of changing plans early, and who owns the machine and what security is registered. For the wider picture, read lease vs buy equipment in Canada.

Why an excavator is a cash flow decision

An excavator uses cash while it earns it. Even a well-priced machine can strain cash flow because contractors commonly face:

  • Mobilization and trucking costs before the job pays
  • Holdbacks on progress payments
  • Weather downtime
  • Repair spikes in hydraulics, undercarriage, pins and bushings
  • Payment terms from clients that do not line up with when you buy fuel and pay crews

That is why chasing the lowest rate is rarely the right goal. The better target is the structure you can comfortably carry after downtime, seasonality and repairs. If you are still deciding whether to rent short term, see rent vs finance equipment. You can browse machines on our excavator financing page.

Tax comparison: lease payments vs CCA and interest

In general, leasing is simpler for tax purposes and buying gives more room to plan, but it is more sensitive to timing.

If you lease

CRA's guidance on leasing costs says you can generally deduct lease payments incurred in the year for property used in your business. On your books that usually shows up as a monthly lease expense, plus GST/HST on each payment, which registrants may be able to claim back as input tax credits. Some leases are treated more like a purchase, depending on their terms; see capital vs operating leases.

If you buy with a loan

You usually have two deductions to think about: CCA on the excavator and interest on the borrowing. CRA's Income Tax Folio on interest deductibility explains that interest on borrowed money can be deductible when the requirements of paragraph 20(1)(c) of the Income Tax Act are met, such as using the money to earn business income. Our plain-language guides cover whether equipment loan payments are deductible and the tax benefits of equipment financing.

Which CCA class an excavator falls into

CRA's list of CCA classes describes Class 38 (30%) as covering most power-operated movable equipment used to excavate, move, place or compact earth, rock, concrete or asphalt, with some conditions. Most excavators used in construction fit there, but your accountant should confirm the class for your machine and use.

The federal Budget 2025, tabled November 4, 2025, reinstated the Accelerated Investment Incentive, which can raise the first-year CCA claim on eligible property. Ask your accountant how it applies to an excavator you buy now.

The available-for-use rule

Buying a machine this year does not automatically mean you can claim CCA this year. CRA notes that you can usually claim CCA once the property becomes available for use. That matters if:

  • You buy late in the year but the machine is not delivered or commissioned
  • The excavator arrives but sits waiting on attachments, GPS or repairs
  • The deal closes while the unit is still being transported or rebuilt

If timing matters for your fiscal year, make sure the machine is actually available for use within it.

GST/HST timing

For a registrant who can claim input tax credits, GST/HST is usually a cash flow issue more than a cost. When you buy, you typically pay GST/HST on the full invoice up front and recover it later through input tax credits, if eligible. When you lease, GST/HST is charged on each payment, which spreads it out. CRA's input tax credit guidance explains that you can generally claim credits for GST/HST paid or payable on property used in commercial activities, subject to conditions. For more, see HST/GST on equipment leases in Canada.

Why structure matters more than rate

Interest rates affect lenders' cost of funds and so lease and loan pricing, but your rate is set by the lender based on your file. On an excavator, the cheapest deal on paper is often less important than the one least likely to cause a cash crunch. Two moves that often work better than stretching the term:

  • An FMV lease, which uses the machine's expected residual value to lower payments
  • Step or seasonal payments that track your utilization and when you get paid

To understand how pricing is quoted, read how to calculate lease rate percentage and equipment lease rates in Canada.

What lenders look for on excavator deals

Excavator approvals depend more on the borrower than on the machine. Lenders want to see you can get through slow months and repair spikes. They work through the 5 Cs:

FactorWhat lenders reviewCharacterPayment history, any government arrears, trade references, and consistent ownership and operationsCapacityCash flow coverage if utilization dips, customer concentration and the quality of receivablesCapitalDown payment and, more importantly, cash left after closing for maintenanceCollateralBrand and model marketability, age, hours, undercarriage condition and documented attachmentsConditionsThe construction cycle, municipal spending, weather exposure, contract length and pricing power

Startups need at least 6 months of revenue in business bank statements. For the accounting side of a loan, see is an equipment loan a liability?

Lease structures that fit excavators

FMV lease

Payments are lower because the residual value is not paid down during the term. This fits when you upgrade, are adding units, or want flexibility at the end.

Fixed buyout or lease-to-own

Payments are higher but the ownership path is clear. This fits when you will keep the excavator long term and want certainty.

Seasonal or step-payment leases

These fit when your cash comes in heavier in certain months or you have mobilization and ramp-up periods. They are often a better answer than a term longer than the machine's realistic working life. Watch total cost items such as fees, interim rent and insurance requirements.

When buying is the better move

Buying makes sense when you have strong liquidity and will run the machine long enough that its residual value stops mattering. It tends to win when:

  • Utilization is high and predictable
  • You have cash reserves for repairs
  • You plan to keep the excavator through major component cycles
  • You can use CCA timing without forcing year-end purchases

Do not buy only for the interest deduction. If the write-off is the only reason the numbers work, look at the deal again.

What has to happen before funding

Most funding delays come from an incomplete pre-funding checklist. Typical conditions include:

  • A final invoice with the serial number and attachments listed
  • Proof of insurance naming the lender as loss payee
  • A void cheque and pre-authorized debit form
  • Proof of business registration and signing authority
  • Delivery confirmation or the equipment's location

Larger packages may add covenants, such as providing annual financial statements, keeping insurance in place and not selling the machine or adding other liens. Lenders also notice early warning signs in bank statements, like volatile balances and NSF activity, so clean books help. Our guide to insurance for leased equipment helps avoid last-minute surprises.

Sale-leaseback as a third option

If you already own one or more excavators and need cash, a sale-leaseback can free it up without taking the machine off the job. It can help you fund growth, consolidate obligations, build a maintenance reserve or get through a slow season. Start with sale-leaseback financing in Canada.

Tools and next steps

Ready to model a loan and a lease side by side for your next excavator? Talk to a financing advisor or call 1-833-863-4644.

Disclaimer: This article is general information only and is not tax, legal or accounting advice. Tax rules change and depend on your situation. Speak with a qualified accountant or tax advisor before making any purchase or filing decision. Mehmi Financial Group does not provide tax advice.

Sources

Written by Jodh Mehmi, Mehmi Financial Group. Read our editorial standards.

Frequently asked questions

Are excavator lease payments tax deductible in Canada?

CRA's leasing guidance says you can generally deduct lease payments incurred in the year for property used in your business, for the business-use portion. Confirm the treatment of your lease with your accountant.

What CCA class is an excavator in Canada?

CRA describes Class 38 (30%) as covering most power-operated movable equipment used to excavate, move, place or compact earth, rock, concrete or asphalt, subject to conditions. Most construction excavators fall there.

If I buy an excavator with a loan, is the interest deductible?

It can be, if the borrowed money is used to earn income and the other requirements of paragraph 20(1)(c) are met. CRA explains this in its interest deductibility folio.

When can I start claiming CCA on an excavator?

CRA notes you can usually claim CCA once the property becomes available for use, which may be later than the purchase date if delivery or setup is delayed.

Do I pay GST/HST differently if I lease or buy?

Usually the timing differs. A purchase typically involves GST/HST on the full invoice, while a lease applies it to each payment. Registrants may be able to claim input tax credits either way, subject to CRA's conditions.

Can a newer contractor lease or finance an excavator?

Yes. Lenders want to see at least 6 months of revenue in business bank statements. Mehmi Financial Group works with over 50 lenders to find a structure that fits. Approval, rates and amounts are subject to lender review.

Apply Now

YOUR NEXT STEP WITH MEHMI

Ready to move forward?

Choose the path that fits your role. Whether you're seeking capital, selling equipment, or placing a client file, start in the right place.

FOR BUSINESS OWNERS

Find financing for your next move.

Buying equipment, refinancing, or managing cash flow? Share your amount, purpose, and timeline so we can review potential options.

Get Financing Options →

For businesses looking for capital

FOR EQUIPMENT VENDORS

Give more buyers a way forward.

Offer financing as part of your sales process and help customers move ahead without building your own lending operation.

Explore Vendor Financing →

For dealers, distributors & manufacturers

FOR BROKERS & ISOs

Have a commercial file to place?

Explore Mehmi's broker program for equipment and business financing submissions and working with our team.

Explore Broker Program →

For commercial finance professionals

This guide is general information, not financial, legal or tax advice. Read our editorial standards.

Explore your industry

Find guidance for your sector and how your business operates.

9 industries · Swipe or use the arrows to see them all.

Transportation & logistics

Explore financing considerations for carriers, logistics businesses and freight operations.

Explore industry →

Construction & contractors

Plan around project costs, contract timing and day-to-day business needs.

Explore industry →

Manufacturing & wholesale

Explore financing for production, order cycles and wholesale operations.

Explore industry →

Farming & agriculture

Consider seasonal cash flow, operating needs and long-term farm investment.

Explore industry →

Restaurants & hospitality

Explore financing for food-service businesses, hospitality operations and growth.

Explore industry →

Medical, dental & wellness

Plan financing around practice operations, patient services and business expansion.

Explore industry →

Technology & business services

Explore financing considerations for project delivery, hiring and growth.

Explore industry →

Forestry, mining & energy

Consider contract cycles, operating requirements and investment in resource businesses.

Explore industry →

Aviation & marine

Explore financing considerations for commercial aviation and marine operations.

Explore industry →